← All products

Construction & Infrastructure

SubmittalForge

Catch BABA and mill-cert deficiencies before the engineer does

SubmittalForge pre-checks Build America, Buy America (2 CFR Part 184) certifications and ASTM mill test reports on federally funded construction before a submittal reaches the engineer of record. It checks that the specification section, the bill of lading, the mill test reports, and the manufacturer's BABA letter agree heat number by heat number—using two independent AI passes to read messy scans and deterministic code to evaluate every chemical limit, tensile requirement, carbon-equivalent formula, and agency waiver threshold.

SubmittalForge project register for the Riverside Water Treatment Plant Upgrade showing submittal status tiles, EPA SRF de minimis waiver usage, and a 100/100 cross-check result

Four documents that have to agree, checked heat by heat

Steel submittals on federally funded jobs get kicked back for mechanical mismatches: a heat number stamped on delivered pipe with no mill cert attached, a BABA letter citing last year's contract number, or a coil melted outside the United States. SubmittalForge reconciles all four documents automatically as soon as you save, scoring the packet from 0 to 100 and listing errors first with the exact rule and document value cited.

SubmittalForge cross-check findings highlighting a missing mill test report for heat #MISSING-HEAT-772, a contract number mismatch on the BABA letter, and a foreign melt failure

Bill of lading ↔ Mill test reports

Every delivered line on the bill of lading records piece marks, quantities, and the heat number stamped on the steel. SubmittalForge verifies that every delivered heat is backed by a certified mill test report in the packet.

Mill test reports ↔ BABA letter

Checks that every heat number across the attached mill test reports is listed on the manufacturer's Buy America certification schedule, matching heat identifiers across documents regardless of case, spaces, or punctuation.

Mill test reports ↔ Spec section

Compares each heat's chemistry, tensile results, and carbon equivalent against the required ASTM grade, and checks whether required Charpy V-notch impact energy (ft-lb) and hot-dip galvanizing (ASTM A123) are documented.

BABA letter ↔ Contract & agency

Verifies that the manufacturer's certification names the active project's contract or award number, states the governing Buy America regime, certifies U.S. coating processes where applicable, and is signed by an authorized officer.

Two-pass AI reading paired with deterministic rules

Language models are good at reading crooked scans and faxes and bad at arithmetic. SubmittalForge separates the two: two independent Gemini passes read each batch of pages and hold any disagreement for a person to confirm, while every ASTM limit, carbon-equivalent formula, and 55% domestic-content test runs in deterministic code.

SubmittalForge MTR values view checking heat SK-44910-B against ASTM A53 Grade B chemical limits and flagging a 2 CFR 184.3 melt-and-pour failure

150-page packet scanning with human confirmation

Multi-page submittal PDFs up to 150 pages are split in the browser into overlapping 8-page batches and read in parallel by two independent models (Gemini 3.5 Flash and Gemini 3.1 Pro). Results are merged by heat; wherever the two passes disagree, the field is highlighted so a reviewer can pick the value that matches the page before saving.

  • While you confirm, the page each heat was read from is shown beside its values
  • On paid plans and project passes, the scanned packet is kept with its submittal with a SHA-256 fingerprint, and View source opens a mill test report at the page it came from
  • Duplicate mill certs appearing under multiple bills of lading are deduplicated with every page number preserved
  • Also supports pasting mill cert text, typing values by hand, or pulling saved certs from your organization's certificate library

ASTM chemistry, tensile & weldability checks

Checks each heat against published limits for encoded structural, reinforcing, pipe, tubing, and stainless grades, plus carbon equivalent by the IIW formula used in AWS D1.1.

  • Encoded grades: ASTM A992, ASTM A36, ASTM A615 Grade 60, ASTM A53 Grade B, ASTM A500 Grade C, and ASTM A312 TP316L
  • Chemical composition checks across C, Mn, P, S, Si, Cu, Ni, Cr, Mo, and V
  • Mechanical checks for minimum yield strength, tensile strength, yield-to-tensile ratio, and elongation, on every tensile test the cert lists
  • Chemistry tables are transcribed as printed and matched to elements by column, so wide multi-heat tables keep each value in its place
  • Other grades are kept as printed with origin and heat traceability checked and limits marked as not checked

2 CFR Part 184 & agency Buy America regimes

Evaluates each submittal under the category rules in 2 CFR Part 184 and the funding agency's specific Buy America regulations.

  • Iron & steel products (2 CFR 184.3): initial melting through coating must occur in the United States
  • Manufactured products (2 CFR 184.3, 184.5): manufactured in the U.S. with more than 55% domestic component cost
  • Construction materials (2 CFR 184.6): process gates for all eight listed material types
  • Section 70917(c) cement and aggregates automatically skip Buy America checks

Agency waiver ledger

On the GC & Engineer plan, tracks non-compliant material costs against the general waivers that apply to your project's funding agency and obligation date.

  • Models EPA Clean Water / Drinking Water SRF (5% de minimis, AIS), FHWA 23 CFR 635.410 (0.1% or $2,500 iron/steel minimal use and phased manufactured-products rule), FTA 49 CFR 661, NTIA BEAD, HUD, DOE, USDA, and FEMA
  • Visual progress bars warn at 60%, 85%, and when an allowance is exceeded

Walkthrough: from a new project to a stamped submittal and audit binder

Watch the four-minute walkthrough of a complete steel submittal review on an EPA State Revolving Fund project—creating the project, filtering the submittal register, attaching mill test reports and bills of lading, inspecting flagged findings, applying review stamps, drafting a BABA certification letter, and exporting the closeout audit binder.

  • Create a project with its contract number, funding agency, obligation date, and cost bases for waiver allowances
  • Add submittals by hand, by scanning a packet PDF up to 150 pages, or by syncing your Procore or Autodesk Construction Cloud submittal log (beta)
  • Inspect the packet score, suggested stamp, cited findings, per-heat MTR values, and delivery traceability in one view
  • Apply NET, MCN, or R&R review stamps with required comments on returned packets and an append-only audit trail
  • Download a closeout-ready Audit Binder ZIP with the register CSV, waiver ledger CSV, activity log CSV, and per-submittal HTML reports

Built for both sides of the submittal table

General contractors, engineers of record, subcontractors, fabricators, and agency auditors can work on the same project with role-specific permissions enforced in both the API and Firestore security rules.

SubmittalForge review stamp bar showing No exceptions taken (NET) applied to a compliant W14x90 column submittal

Role-based project sharing across companies

The owning organization can share an individual project with outside email addresses in three roles: Submitter (subcontractor or fabricator who adds submittals, documents, and BABA letters), Reviewer (engineer of record who can also apply and remove review stamps), or Viewer (owner's representative or agency auditor with read-only access to every submittal, stamp, comment, and activity log entry).

Review stamps & automatic invalidation

Apply No exceptions taken (NET), Make corrections noted (MCN), or Revise and resubmit (R&R). MCN and R&R require a reviewer comment explaining what to fix. Each stamp records the reviewer's email, organization, and timestamp, and is automatically cleared if the underlying documents are edited and saved again. On the GC & Engineer plan, print a one-page stamped review record (stamp, reviewer, comment, findings, and source-file fingerprints) for the project file.

Spec-section reading & certificate library

On the GC & Engineer plan, upload a specification section PDF to propose CSI material requirements (grade, Charpy V-notch, galvanizing) with the source sentence cited for review. Save verified mill certs to your organization's certificate library once and attach them across projects.

Procore, Autodesk Construction Cloud & audit binder

Connect Procore or Autodesk Construction Cloud via OAuth to link a project and sync its submittal log into SubmittalForge (in beta; review results are not yet written back). At pay-application review or closeout, export the Audit Binder ZIP recomputed from live project data.

Free public tools, reference guides, and mobile review

SubmittalForge ships free tools and public reference pages that work in any desktop or phone browser without an account, alongside a mobile-responsive workspace for checking packets and waiver status in the field.

SubmittalForge on a phone showing project summary tiles and the EPA SRF de minimis waiver barSubmittalForge on a phone showing cited cross-check findings for contract mismatch and missing heat numbersSubmittalForge on a phone showing packet score, NET/MCN/R&R stamp buttons, and ASTM A53 Grade B melt-and-pour results
Project status, cited cross-check findings, and per-heat MTR checks in the mobile view.

Free Mill Test Report Validator

Paste mill cert text, enter values by hand, or upload a one-page PDF or image to check chemistry, tensile strength, yield-to-tensile ratio, elongation, carbon equivalent, and U.S. melt and pour against the ASTM grade and 2 CFR 184.

Free BABA Certification Letter Generator

Draft a 2 CFR Part 184 manufacturer certification letter with live eligibility checks as you type, or pre-fill one directly from a submittal's mill certs inside the app so heat numbers and mills match automatically.

50-State BABA Directory & ASTM Spec Pages

Look up SRF, BEAD, and federal-aid highway program contacts and rules for all 50 states, D.C., and Puerto Rico (/baba), or inspect the exact chemical and mechanical limits encoded for each supported ASTM standard (/astm).

Interactive Sample Workbench

Open /workbench to explore a pre-loaded water treatment plant submittal queue and run the real reconciliation and ASTM rules engine in your browser without signing up.

Self-serve plans for single jobs or whole project teams

Start with the free tools and a free project workspace. Upgrade to a one-time Project Pass for a single federal job, Subcontractor Pro for regular submittals, or GC & Engineer for multi-project review and closeout.

SubmittalForge BABA certification letter generator showing live eligibility checks on a manufacturer letter

Free — $0

For spot-checking individual documents and trying a small project.

  • 1 user and 1 project with up to 5 submittals
  • Free MTR validator (paste text or upload 1 page at a time)
  • BABA certification letter generator with live eligibility checks and 1 unwatermarked export
  • Manual MTR entry, heat-number cross-checks, and NET / MCN / R&R review stamps
  • Cross-company project sharing (people at other companies never use a seat) and activity log

Project Pass — $199 once

For contractors or fabricators with one federally funded job and no subscription.

  • Covers one project until closeout without counting toward the Free project limit
  • Up to 500 submittals on that project
  • Multi-page packet scanning (up to 150 pages per PDF) with two-pass confirmation
  • Unwatermarked BABA letters drafted from that project's submittals
  • Scanned packets and signed letters kept with each submittal (10 GB for the project)
  • Can be purchased before or after creating the project

Subcontractor Pro — $79/mo or $790/yr

For fabricators, suppliers, and subcontractors submitting across multiple jobs (includes a 14-day free trial).

  • Up to 3 users, 10 projects, and 500 submittals per project
  • 150-page packet scanning and unlimited unwatermarked BABA letters
  • Organization-wide saved mill certificate and SKU library across GCs
  • Source files kept with each submittal (50 GB per organization)
  • Everything in Free, including cross-checks, review stamps, and project sharing

GC & Engineer — $299/mo or $2,990/yr

For general contractors and engineering firms reviewing submittals and preparing agency closeout records.

  • Everything in Pro, with unlimited users, up to 25 projects, and 2,000 submittals per project
  • Agency waiver ledger for de minimis, minimal-use, and small-grant allowances
  • Printable stamped review records for the project file
  • AI spec-section PDF reading for grade, Charpy V-notch, and galvanizing requirements
  • One-click Audit Binder ZIP export with register, waiver ledger, activity log, and HTML reports
  • Procore and Autodesk Construction Cloud (ACC) submittal-log OAuth sync (beta)
  • Source files kept with each submittal (250 GB per organization)

SubmittalForge is a pre-check. It does not provide engineering services or legal advice and does not decide compliance—the engineer of record, the contracting officer, and the awarding agency make the final determination.

Compatibility & requirements

Web application

  • Runs in any modern desktop or mobile browser at submittalforge.com
  • Free MTR validator, BABA letter generator, sample workbench, 50-state BABA directory, and ASTM grade pages require no account
  • Sign in with Google or with a verified work email and password; team invitations and cross-company project sharing included

Documents, standards & integrations

  • Packet scanning reads PDF, PNG, JPG, and WebP files up to 150 pages in 8-page browser batches; on paid plans and project passes, source files (PDF or image, up to 200 MB each) are kept with their submittals, and files checked with the free tools are never stored
  • Deterministic checks for 2 CFR Part 184, agency Buy America regimes (EPA SRF, FHWA, FTA, NTIA BEAD, HUD, FEMA), AWS D1.1 carbon equivalent, and ASTM A992, A36, A615 Gr 60, A53 Gr B, A500 Gr C, and A312 TP316L
  • Optional OAuth 2.0 submittal-log sync with Procore and Autodesk Construction Cloud (ACC) on the GC & Engineer plan (beta)